Loading...
Sedans

TOYOTA Camry Power Steering Fluid Complete Flush

TOYOTA Camry Power Steering Fluid Complete Flush

Flushing power steering fluid and eliminate power steering pump noise. this video will show you complete power steering flush of the system step by step…

Procedure
..Jack the car up to make the job easy and open the hood, locate the power steering reservoir and open the cap, suck the old fluid out by oil suction pump as I did or use Turkey baster, after sucking all the old in reservoir, turn the wheel twice lock to lock and the remaining fluid comes to reservoir and do the same method to take it out
..Open the hoses claps on the reservoir and take it out to clean to clean it with carb cleaner
After connecting the reservoir connect the suction hose and let the discharge hose free to see when new fluid comes out
…Add new fluid now, I used ATF 3, that’s what recommend by owner Manuel
… After filling reservoir, turn the wheel twice lock to lock, it will take the fluid from reservoir to the system and fill the reservoir again
…Do this method few times, till you see new fluid comes out from the small diameter hose,witch was free
…Connect the discharge hose to the reservoir and add fluid if necessary
… Turn the engine on and turn the wheel lock to lock to come out any bubble in the system and add fluid if necessary
…Lower the jack and Take the car for a 10 minutes drive

Note: if you notes any sound,it means the system still got bubble use the same method to take it out

for contact
email address: [email protected]
Facebook account : https://www.facebook.com/ali.hoshyar.311?fref=ts
Like Facebook page: https://www.facebook.com/Alimech-1296961967080160/
Video Rating: / 5